car maintenance tips

Car maintenance costs you a lot of money.

But, what if you could save some bucks by servicing your vehicle once in a while at your home?

With some DIY tricks, you’ll be able to take care of the essential car components and ensure top-notch performance from them.

Car Components And How You Can Clean Or Replace Them

  1. Windshield Wiper Blades

Wipers need replacements every six months. However, instead of going to an auto shop every time to replace them, follow these steps to change them yourself.

Step 1: Lift the wiper blades the way you wash the windshield of your car.

Step 2: Now remove the blades while paying attention to how they are connected to their metal arms.

Step 3: Most cars come with a button underneath its wipers which you can push to remove old blades.

Step 4: Fix the new blades, but take care not to bend its arms. Also, make sure not to scratch the windshield while replacing the unit.

However, the arrangement of wiper blades differs for various car models. Hence, check the manual once before replacing them. Essentially, the procedure is similar for almost all models as mentioned above.

  1. Battery

Without a properly functioning battery, your vehicle won’t run. Hence, its maintenance becomes essential for all car owners. A car battery is also one of the delicate car elements as even a little residue on its connectors may hamper your car from running. Thus, perform a visual check every once in a while to make sure they are in the right condition.

Battery terminals are crucial, and cleaning it isn’t rocket science!

Step 1: Remove the terminals; always remove its negative cable first. Keep a flathead screwdriver handy if those terminals are stuck. It can loosen them up.

Step 2: Apply some cleaner on their posts to clean them. You can also make such a cleaner at home with baking soda and water.

Step 3: Wash off the cleanser with water. Then, dry the terminal posts before replacing the battery terminals.

Pro tip: Protect the terminals of your car battery by using a protective spray. These sprays are high-temperature lubricants that keep those terminals cooler. It’ll keep their early replacement at bay.

  1. Brake Pads

Brake pads require replacements after every 20,000 miles; however, check the owner’s manual before changing them. Replacing the pads can be a little more complicated than you imagine.

Hence, numerous auto shops in the UK can assist you in replacing brakes Billinghay and in other parts of the nation. Garages such as Roberts Tyres also help in repairing other car components like clutch, air-con system, car tyres in Sleaford.

However, with little extra effort, there’s nothing you can’t do yourself!

Step 1: Jack up the vehicle and secure it on the jack stands to remove the tyres.

Step 2: Now, remove the brake calliper. The brake pads should slide out.

Step 3: Replace the old pads with newer ones and secure them with its older retaining clips in the same way as it was there earlier.

Step 4: Put the calliper in place by re-installing it the same way you removed it.

Thus, maintain your car at home now without spending too much money. But, ensure you take safety precautions while doing it. If the procedure seems complicated, seek a professional’s help instead of putting yourself in harm’s way.