3136865

On average, a car going at 20mph will travel at least 20 ft. before coming to a complete stop. If its speed is doubled, at 40mph, the stopping distance will increase to a staggering 80 ft., or almost the length of 5 family vehicles.

Traveling for such a long distance before coming to a dead halt can significantly increase the chances of an accident, especially in the winters or monsoons, when the roads provide even less grip due to ice formation or aquaplaning.

The stopping distance of a car is one of its most important safety parameters. Your car’s road-worthiness is determined by measuring the distance it takes to come to a complete stop. Even when you take it for an MOT Ancaster or anywhere else in the UK, the tester will inevitably check the condition of its brakes to determine whether your car is safe for you and the fellow drivers on the road.

There are various factors that affect your car’s stopping distance

Various other parameters play a crucial role in determining how far your car will go before coming to a stop. For example, its speed plays a crucial role in deciding its stopping distance. If you are traveling at higher speed, your car will go a lot further before coming to a halt due to the increased inertia. Even an increase of a mere 10 miles per hour can increase its braking distance by almost 25 ft., nearly the length of 2 vehicles. Various other factors like its tyres and brakes, driving condition, etc. too play an important role.

How to reduce the stopping distance of your vehicle?

Fortunately, most of the aspects that affect your car’s stopping distance can be monitored and practiced to keep at a minimum. So, let’s take a look at what affects your car’s braking distance and how to decrease it.

  • Keep the weight at a minimum – Do not carry unnecessary weight in your car. Extra weight will increase its inertia, increasing its stopping distance. This is especially evident in the winters when ice and snow formation reduces road grip.

Keeping your car’s centre of gravity at the middle of its chassis can also reduce its stopping distance. If your vehicle is too tail heavy, it can sway end-first in case of hard braking.

  • Take care of your car’s brakes – Periodic maintenance of a car’s brakes will minimize its stopping distance. Regular use wears out the brake pads, which reduces its affectivity. Also, excessive heat in the hub can warp the brake rotors, which can cause it to fail completely.

Ideally, you should take your car for a complete service of its brakes Ancaster or anywhere else in the UK at least once every year. Also, keep an eye out for any sign of malfunction, like screeching noises coming from the brake hub, vibration while braking, etc. Whenever you notice these issues, take your car to a reputed service garage, like Roberts Tyres, for inspection and repair.

  • Check the tyres – The quality of your car tyres, as well as its tread depth, plays a crucial role in determining its stopping distance. The UK government requires a minimum of 1.6mm tread depth on all four tyres of a vehicle, however, experts’ advice maintaining at least 3mm tread depth for best performance.

Tyre pressure also plays a key role. Even a drop of 1.0 psi pressure can increase your car’s braking distance by almost 15 ft.

Proper maintenance, driving within the speed limit, and using good quality spare parts will help you shorten your car’s braking distance and keep you safe during your daily commute. Keep the above-mentioned points in mind and enjoy and even-free commute.